#Best cura slicer settings software#

#Best cura slicer settings software#

The settings we’ve described here are just a few of the things we change when one of our customers needs a prototype quickly, but they are some of the most impactful settings in the print slicer software when speed is a priority.

If you take the time to understand the settings available in the software and choose settings that fit the goals of your print, you’ll get better results in less time. Tweaking software settings may not be the most glamorous part of 3D printing, but it’s something you should not overlook. It’s worth it to spend a few minutes trying different orientations and checking the estimated print time for each one. Most 3D printers automate this process, but you can add or remove primer lines and blobs in Custom settings of Cura. These simple changes can knock hours off of the print time for a large object. This reduces the number of layers required for the print., If you can orient the part such that the largest dimension is in the X or Y direction, you’ll get a much faster printing time. In this 3 part series, I will teach about each Cura setting and show you test prints that show exactly how each setting affects your prints. In many cases, you can greatly reduce printing time by orienting the part in a way that reduces the amount of support material required.Īdditionally, 3D printers can typically print much faster in the X and Y axes as opposed to the Z axis. When you load a model into the printer software, it’s important to pay attention to how the part is oriented on the print bed. If we’re running the print on a machine with a larger nozzle, we might bump it up even higher to 0.32mm.

For a fast prototype, we recommend choosing a larger layer height, such as 0.3mm. However, a print at this layer height could take a very long time. For ultimate detail, you would select a small layer height, such as 0.1mm. This is the most impactful setting for speed and quality of 3D prints.

Our slicer software of choice is Simplif圓D, but if you’re using another slicer such as Slic3r or Cura, you should be able to find comparable settings in your software. Even if you want to print your final product at a higher quality level, it often makes sense to trade quality for speed during the prototyping process. For this use case, speed is the most important consideration. In this post, we’ll be focusing on software settings for rapid prototypes. Each of these settings has an effect on the print quality and print time, so it’s important to configure the software appropriately for the goal you are trying to achieve, whether that be a quick prototype or a polished final product. The print preparation software, often known as a slicer, provides you with an overwhelming number of settings for the print. 3D printing isn’t quite as simple as loading up a model and pressing a button.